FORGOT YOUR DETAILS?

THE CARVER WAY

QUICK DRAIN

Carver’s exclusive “V” body design jets force water to drain from the Whirlpool Bathtub’s pipes into the bathtub, guaranteeing a dry, clean system.

ARCHED NO FLEX PVC PIPE

Schedule 40 pipes are heated and hand molded in Arches to form fit each of Carver Tubs unique Whirlpool Bathtubs. This process ensures that no water remains in the system after use and leaves the system dry and clean for years.

MADE IN THE USA

MADE IN AMERICA, Handcrafted by our bathtub experts in Carver Tub’s State of the Art Facility, located right here in the USA.

WHAT TO AVOID

Dirty

There is nothing worse than a dirty bathtub! Here’s why most Whirlpool Systems are unsanitary.

WATER REMAINS IN SYSTEM

Overtime, flex piping can wear and sag, allowing for residual water to remain after use in the system’s piping. This ‘standing water’ is the culprit of foul odors or worse; blackish residue entering your bathtub when the system is first activated.

Flex Pipe & T Jets

Easier to mass-produce, flex piping and ‘T’ style jets are often used by Whirlpool Bathtub Companies to save time and costs during the manufacturing process.

TECHNICAL INFORMATION

All of Carver Tub's Whirlpool Motors operate on a 110V outlet. The Whirlpool Motor is mounted to the tub and comes with standard 3 prong cord.  Please See our Electrical Page for more information on the electrical requirements.

Knowing your whirlpool bathtub's motor side is important for many reasons. Most states require a serviceable access panel to the power bearing components of a bathtub. For new construction builds, many times the motor side is not important, but for remodels, it can cause setbacks during installation. The diagrams on our Motor Side Page will help you quickly select the correct way.

We have spec sheets available showing the different jet placements for each bathtub.

You can download spec sheets here

More Information about Carver Tub's Warranty Information Available Here

Whirlpool Jet Packages

Carver Tubs offers a variety of different jets and locations to meet your Hydrotherapy Needs!

  • 6 Jet Whirlpool Systems
  • 12 Jet Whirlpool System
  • 14 Jet Whirlpool Systems

Electrical Requirements

All of Carver Tubs Whirlpool Pumps require just 1 Dedicated 20 AMP GFCI Breaker

  • 6 Jet System Motor: 7 AMPS
  • 12 Jet System Motor: 13 AMPS
  • 14 Jet System Motor: 15.7 AMPS
  • Additional Breakers required for Heater, Air Massage & Vibro Jets

3 Speed Quiet Pump

Our Whirlpools come with 3 Variable Speeds and the ability to increase or decrease the air flow to the system.

  • Low
  • Medium
  • High

YOUTUBE

7245

FACEBOOK

592

INSTAGRAM

500
TOP